Introduction
M10 chemical anchors are fasteners secured within substrates using chemical adhesives, where the M10 designation indicates a 10-millimeter screw diameter. They typically consist of a screw, chemical adhesive tube, nut, and washer.
Parameters and Specifications
|
Origin: Nantong, Jiangsu / Handan, Hebei |
Product performance: embedded, anchored |
|
Scope of application: curtain wall projects, construction projects, etc. |
Packaging specifications: box |
|
Functional use: External reinforcement, building exterior wall reinforcement |
Material: q235 |
|
Implementation standard: GB |
Surface treatment: galvanized
|
Features
High Load Capacity
The chemical adhesive bonds fully with the substrate hole walls, forming a secure anchorage with greater load-bearing capacity than standard expansion bolts.
Wide Applicability
Suitable for various substrates including concrete, rock, and brick walls.
Strong Corrosion Resistance
Often paired with stainless steel screws, enabling long-term use in humid or corrosive environments.
Excellent Seismic Performance
Adhesive fixation eliminates expansion forces, preventing substrate cracking and delivering superior seismic and impact resistance.
Customization Options
Rod: Length, diameter, and material (carbon steel or stainless steel)
Adhesive: Type, properties (fast curing, corrosion resistant), and packaging
Nut & Washer: Material and size
Accessories: Packaging format and optional tools (gun, nozzle, brush)
FAQ
Q1: What size hole should I drill for an M10 chemical anchor bolt?
A: Drill a hole with a diameter of 12–14 mm and a depth of 10–12 times the rod length.
Q2: How should I prepare the drilled hole?
A: Clean the hole thoroughly to remove all dust and debris before installing the bolt.
Q3: How do I apply the adhesive?
A: Inject adhesive to fill approximately 2/3 of the hole, making sure to avoid air pockets.
Q4: How should the rod be inserted?
A: Insert the rod while rotating it and ensure it is centered so that the adhesive fully surrounds the rod.
Q5: How long should the adhesive cure?
A: Allow the adhesive to cure for 30 minutes to several hours, depending on temperature and environmental conditions.
Q6: How is the final installation completed?
A: Install the washer and nut, then tighten the bolt using a torque wrench to the recommended torque.
Hot Tags: m10 chemical anchors, China m10 chemical anchors manufacturers, suppliers, factory, anchors, drop in anchors, M10 Chemical Anchors, Metal Expansion Anchor Bolts, wedge anchors
